SP 5A-60Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel components are made in stainless steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump carries drinking water approval. The pump is fitted with a 5.5 kW MS6000 motor with sand shield, mechanical shaft seal, water-lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good mechanical stability and high efficiency. Suitable for temperatures up to 40 °C. The motor is fitted with the Grundfos Tempcon sensor that, by use of powerline communication together with a MP204 control panel, enables temperature monitoring. The motor is for direct-on-line starting (DOL).Liquid:Pumped liquid:  WaterMaximum liquid temperature:  40 °CMax liquid t at 0.15 m/sec:  40 °CSelected liquid temperature:  20 °CDensity:  998.2 kg/m³Technical:Pump speed on which pump data are based:  2900 rpmRated flow:  5 m³/hRated head:  245 mShaft seal for motor:  CER/CARNBRApprovals on nameplate:  CE,GOST2Curve tolerance:  ISO9906:2012 3BMotor version:  T40Specification for shaft end:  CYLINDRICALMaterials:Pump:  Stainless steel   EN 1.4301   AISI 304Impeller:  Stainless steel   EN 1.4301AISI 304Motor:  Stainless steel   DIN W.-Nr. 1.4301   AISI 304Installation:Pump outlet:  Rp1 1/2Motor diameter:  6 inchElectrical data:Motor type:  MS6000Rated power - P2:  5.5 kWPower (P2) required by pump:  5.5 kWMains frequency:  50 HzRated voltage:  3 x 380-400-415 VRated current:  13.6-13.4-13.6 AStarting current:  470-510-520 %Cos phi - power factor:  0.82-0.78-0.75Rated speed:  2870-2880-2890 rpmStart. method:  direct-on-lineEnclosure class (IEC 34-5):  IP68Insulation class (IEC 85):  FBuilt-in temp. transmitter:  yesMotor No:  78195511Others:Minimum efficiency index, MEI ≥:  0.50ErP status:  EuP Standalone/Prod.Net weight:  62.5 kgGross weight:  87.8 kgShipping volume:  278 m³